Goodridge G-Link quick disconnect couplings (otherwise known as dry-breaks) are a lightweight coupling that can be disconnected and reconnected in seconds, without the need to re-bleed the system.<\/p>\n
G-Link\u00a0couplings are designed for use with brake lines, fuel lines, oil lines and pneumatics.<\/p>\n
There are two types of G-Link available, \u2018bayonet\u2019 and \u2018pull type\u2019, both with a range of seals to suit different applications.\u00a0<\/p>\n
These pull type couplings use a locking mechanism designed for single handed operation, a \u2018pull\u2019 of the outer sleeve will couple\/uncouple the G-Link with no separate actuation required for operation.<\/p>\n
To verify the correct connection, the female half is equipped with a green indicator ring. The indicator ring can alternatively be replaced by a retaining clamp. (This can only be attached when the halves are coupled and eliminates the risk of unintentional coupling).<\/p>\n
Additionally, the whole operating mechanism is O-ring sealed to achieve particular suitability for rough conditions and to reduce environmental effects.<\/p>\n
Both halves, plug and socket, are equipped with self-acting valves to stop fluid loss and air ingress.<\/p>\n
The pull type can hold pressure up to 150 bar (AN-06 & AN-08) & 100 bar (AN-12).<\/p>\n
Available in JIC\/UNF AN-06, AN-08 & AN-12 thread fitments.<\/p>\n
Additionally pull type dry break couplings can be used as a security shut-off device, e.g. for fuel lines.<\/p>\n
For this purpose one half of the coupling is equipped with a lanyard to separate the halves in case of an accident\u00a0(see available LANYARD options on separate page)\u00a0<\/p>\n
Technical Information:<\/strong><\/p>\n \u00a0<\/p>\n For further technical information please check the Goodridge Performance Parts catalogue, which is available to download on www.goodridge.com, or contact our technical customer service team.<\/p>\n **Goodridge G-Links are\u00a0designed & developed\u00a0for motorsport and off-road use only**<\/strong><\/p>\n","protected":false},"excerpt":{"rendered":" Goodridge G-Link quick disconnect couplings (otherwise known as dry-breaks) are a lightweight coupling that can be disconnected and reconnected in seconds, without the need to re-bleed the system. G-Link\u00a0couplings are designed for use with brake lines, fuel lines, oil lines and pneumatics. There are two types of G-Link available, \u2018bayonet\u2019 and \u2018pull type\u2019, both with<\/p>\n\n\n
\n Seal Type<\/strong><\/td>\n Description<\/strong><\/td>\n Operating Temperatures<\/strong><\/td>\n Fluids<\/strong><\/td>\n<\/tr>\n \n \u00a0FPM B<\/td>\n Fluorocarbon<\/td>\n -20\u00b0C to 200\u00b0C<\/td>\n Fuel, Ethanol, Vegetable oil<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n